Inserting A Memory Media; Removing A Memory Media - Toshiba Tecra M11-SP4002 User Manual

Inserting a memory media

The following instructions apply to all types of supported media devices. To
insert a memory media, follow the steps as detailed below:
1. Turn the memory media so that the contacts (metal areas) are face down.
2. Insert the memory media into the Bridge media slot on the front of the
computer.
3. Press the memory media gently to ensure a firm connection is made.
1. Bridge media slot
■
Make sure memory media is oriented properly before you insert it. If you
insert the media in wrong direction, you may not be able to remove it.
■
When inserting memory media, do not touch the metal contacts. You
could expose the storage area to static electricity, which can destroy data.
■
Do not turn the computer off or switch to Sleep Mode or Hibernation
Mode while files are being copied - doing so may cause data to be lost.

Removing a memory media

The following instructions apply to all types of supported media devices. To
remove a memory media, follow the steps as detailed below:
1. Open the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.
2. Point to memory media and click the left Touch Pad control button.
3. Press the memory media to partially extend it out of the computer.
4. Grasp the media and remove it.
1. Bridge media slot
User's Manual
2. Memory media
Inserting a memory media
2. Memory media
Removing memory media
Hardware, Utilities and Options
1
2
1
2
3-22