Using Optical Disc Drives - Toshiba Tecra M11-SP4002 User Manual

Using optical disc drives

The full-size drive provides high-performance execution of CD/DVD-ROM-
based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/
DVDs without an adaptor. A Serial ATA interface controller is used for CD/
DVD-ROM operation. When the computer is accessing a CD/DVD-ROM,
an indicator on the drive glows.
Use the DVD playback application to view DVD-Video discs.
If you have a DVD Super Multi drive, refer also to the
DVD Super Multi drives
Loading discs
To load CD/DVDs, follow the steps as detailed below:
1. When the computer's power is on, press the eject button to open
the disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
1. Disc tray
User's Manual
section for precautions on writing to CDs/DVDs.
Pressing the eject button and pulling the disc tray open
Writing CD/DVDs on
2. Eject button
Operating Basics
1
2
4-15