Equinox Systems Fusion Saber User Manual page 5

Operating instructions
DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the fixture and each fixture independently.
To access the DMX address mode, press the "MENU" button on the front of the unit to show
Addr
on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN"
buttons to set the required DMX address. Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
DMX channel mode:
ChNd
To access the DMX channel mode, press the "MENU" button on the front of the unit to show
on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose
one of the 9 or 17 DMX channel modes. Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk Fusion Saber User Manual
5