Table of Contents
Advertisement
MAIN OVEN FUNCTIONS
Symbol
Off position
Thermaflow®
Plus Steam
Moist Fan Baking
You can defrost food by choosing
Moist Fan Baking function without
setting the temperature.
ACTIVATING AND DEACTIVATING THE TOP /
MAIN OVEN
It depends on the model if your
appliance has knob symbols,
indicators or lamps:
•
The indicator comes on when the
oven heats up.
•
The lamp comes on when the oven
operates.
•
The symbol shows whether the
knob controls one of the cooking
zones, the oven functions or the
temperature.
1. Turn the knob for the top / main oven functions
to select an oven function.
2. Turn the knob for the temperature to select a
temperature.
3. To deactivate the oven turn the knob for the
top / main oven functions to the off position.
Oven function
The oven is off.
To bake on up to two shelf positions at the same time and
to dry food.
To add humidity during the cooking. To get the right colour
and crispy crust during baking. To give more juiciness dur-
ing reheating.
This function was used to comply with the Energy Effi-
ciency Class and Ecodesign Regulations (according to
EU 65/2014 and EU 66/2014). Tests according to:
IEC/EN 60350-1.
The oven door should be closed during cooking so that
the function is not interrupted and to ensure that the oven
operates with the highest energy efficiency possible.
When you use this function, the temperature in the cavity
may differ from the set temperature. The heating power
may be reduced. For general energy saving recommenda-
tions refer to "Energy Efficiency" chapter, Energy Saving.
This function is designed to save energy during cooking.
For the cooking instructions refer to "Hints and tips" chap-
ter, Moist Fan Baking.
ACTIVATING THE FUNCTION: PLUS STEAM
This function increases humidity while cooking.
WARNING! Risk of burns and
damage to the appliance.
Released humidity can cause burns:
•
Do not open the appliance door when using the
function: Plus Steam.
•
Open the appliance door carefully after using
the function: Plus Steam.
Refer to "Hints and tips" chapter.
1. Open the oven door.
2. Fill the cavity embossment with tap water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water only
when the oven is cold.
3. Turn the function knob: Plus Steam
4. Turn the temperature knob to set a
temperature.
5. Put food in the appliance and close the oven
door.
Application
.
17
Advertisement
Table of Contents
