Cleaning The Hose Filter - Gram OM 62-37 T Instruction Manual

Maintenance and cleaning
4. Clean all three filters under tap water by
means of a brush.
5. Replace the metal/plastic filter.
6. Place the coarse filter into the microfilter.
Make sure that it is properly seated. Turn
the coarse filter clockwise until a "click"
sound is heard.
C
Do not use the dishwasher
without filter.
C
Incorrect placement of the filters
will reduce washing efficiency.

Cleaning the hose filter

Damages on the machine that may be
caused by impurities coming from the urban
supply water or your own water installation
(such as sand, dirt, rust, etc.) can be
prevented by means of the filter attached to
the water inlet hose. Check the filter and the
hose regularly and clean them if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it under
running tap water.
3. Place the cleaned filter back to its seat in
the hose.
4. Install the hose to tap.
(depends on model)
29 / 36 EN