CONTENTS Technical specifications …………………………………………………….. • Conformity with the standards and Test data …………………………….. • Safety information and Recommendations………………………………….. Recycling ..………………………............• Safety information …………………………………………………………… • Recommendations …...……………………………………………………… • Items not suitable for dishwashing ………………………………………… • Installing the machine ………………………………………………………….. Positioning the machine …………………………………………………….. •...
Page 3
Loading your dishwasher .……………………………………………………. Top basket…………………………………………………………………... • Lower basket………………………………………………………………... • Alternative basket loads …………………………………………………... • Programme descriptions .…………………………………………………….. Programme items ………………………………………………………….. • Selection of Program and Starting of the Machine..……………..Selection of Program and Starting of the Machine ……………………. • Programme follow-up ………………………………………………………...
Technical specifications Capacity 15 plate settings Height 820 mm- 870 mm/870mm- 920mm Width 598 mm Depth 570 mm Net Weight 50 kg Electricity input 220-240 V, 50 Hz Total Power 2200 W Heating Power 2000 W Pump Power 100 W Drain Pump Power 30 W Water supply pressure 0.03 MPa...
• Check for any damage to your machine or to its packaging. Never start a machine damaged in any way, make sure to contact GRAM service. • Unwrap the packaging materials as indicated and dispose of them in accordance with the rules.
Page 7
• Check whether the indoor electrical fuse system is connected according to the regulations. • All electrical connections must match the values indicated on the rating plate. • Pay special attention and be sure that the machine does not stand on the electricity supply cable. •...
Page 8
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision.
For your children’s safety • After removing the machine’s packaging, make sure that the packaging material is out of reach of children. • Do not allow children to play with or start the machine. • Keep your children away from detergents and rinse aids. •...
Items not suitable for dishwashing: • Cigarette ashes, candle leftovers, polish, paint, chemical substances, iron-alloy materials; • Forks, spoons and knives with wooden or bone, or ivory or nacre-coated handles; glued items,items soiled with abrasive, acidic or base chemicals. • Plastic items that are not heat-resistant, copper or tin-coated containers.
Position the machine close to a water tap or drain. You need to site your machine, taking into consideration that its connections will not be altered once they are made. Do not grip the machine by its door or panel in order to move Take care to leave a certain clearance from all sides of the machine so that you can comfortably move it back and forth during cleaning.
Water inlet hose Do not use the water inlet hose of your old machine,if any. Use the new water inlet hose supplied with your machine instead. If you are going to connect a new or long - unused water inlet hose to your machine ,run water through it for a while before making the connection.
Water outlet hose The water drain hose can be connected either directly to the water drain hole or to the sink outlet spigot. Using a special bent pipe (if available), the water can be drained directly into the sink via hooking the bent pipe over the edge of the sink.
Electrical connection The earthed plug of your machine should be connected to an earthed outlet supplied by suitable voltage and current. If there is no earthing installation, have a competent electrician carry out an earthing installation. In case of usage without earthing installed, our company will not be responsible for any loss of usage that might occur.
Prior to using the machine for the first time Check whether the electricity and supply water specifications match the values indicated by the • installation instructions for the machine. Remove all packaging materials inside the machine. • Set the water softener. •...
Testing strip The washing effectiveness of your machine depends on the softness of the tap water. For this reason, your machine is equipped with a system that reduces the hardness in mains water supply. The washing effectiveness will increase when the system is correctly set. To find out the water hardness level of water in your area, contact your local water board or determine water hardness level by using the test strip(if available).
Page 20
Adjust water hardness setting of your machine according to the level specified on the test track. Enter the menu to change water hardness. In order to enter the menu settings, hold the option and delay buttons for 3 seconds. The display will show an expression (“Keep Pressing ..
Detergent usage Use a detergent specifically designed for use in domestic dishwashers. You can find powder,gel,and tablet detergents in the market that have been designed for household dishwashers. Detergent should be put into the compartment prior to starting the machine. Keep your detergents in cool, dry places out of reach of your children.
They produce good results for certain types of usage only. If you are using this type of • detergents, you need to contact the manufacturers and find out about the suitable conditions of use. When the conditions of use of such products and the machine settings are appropriate, •...
Warning: Use only those rinse aid materials which are allowed for use in the machine. As rinse aid residues left as a result of overflowing will create extremely high amounts of foam and thus reduce the washing performance, remove the excess amount of rinse aid by wiping it with a rag. LOADING YOUR DISHWASHER If you properly place your dishes into the machine, you will be using it in the best way in terms of energy consumption, washing and drying performance.
Top basket height adjustment while it is full Basket height adjustment mechanism on the top basket of your machine is designed to let you adjust the height of your top basket upwards or downwards, without removing it from your machine when it is full, and create large spaces at the top or bottom area of your machine as needed.
Page 25
Upper Cutlery Basket The upper cutlery basket is designed for you to place forks, spoons and knives, long dippers and small items. Because it can easily be taken out of the machine, it allows your dishes to be taken out of the machine along with the basket after washing.
Page 26
Multi-functional Rack System Multi-functional rack system is located in the bottom basket of your machine. You can easily wash spare glasses or dishes like long ladles, bread knife with the help of this accesory. Please fold the racks by putting them from position to position, in order to put the racks in the multi-functional rack system into the...
Alternative basket loads Lower Basket Top basket...
Page 28
Faulty loads Important Note for Test Laboratories For detailed information on performance tests, please contact following address: "dishwasher@standardtest.info” . In your email, please provide the model name and serial number (20 digits) which you can find on the appliance door. ...
PROGRAM DESCRIPTIONS Program tems Referance Program No Dual Wash 65° C Name of Program Jet Wash 18' Quick 30' Eco 50°C Super 50' . Daily Oto 30° C - 50° C Oto 50 C - 60° C Oto 60° C - 70° C Washing 35°...
Selection of Program and Starting of the Machine 9 10 11 12 13 14 15 16 17 1-On/Off 16-Rinse Aid Level Warning Indicator 2-Door Handle 17-Child Lock Indicator 3-Confirmation Button 18-Delay Indicator 4-Option Button 19-Remaining Time/Delay Time Indicator 5-Delay Button 20-Program Number Indicator 6-Start/Pause button 21-Display Information Line...
Page 31
BUTTONS Power On/Off Button When you press the on/off button, the machine is energized and the display shows the last used program; in the off position, the LEDs on the display are off. Door Handle Please use the door handle to open-close the door of your machine. Confirmation Button Confirms (saves) your additional functions and settings.
Page 32
If you have little amount of dishes in your machine and if you have to wash them, you can also activate the semi-filling function for some programs. If you have dishes in both baskets, select the half load function and select the position in which both images are highlighted.
Selection of Program and Starting of the Machine 1- Press Power On/Off switch. Note: Select your washing program appropriate for your dishes by the help of the program items page in the user guide. 2- You may select the washing program by using up/down (7,8) selection buttons. Note: You may follow the program time in the time indicator.
Program Follow-up You can follow the progress by the help of the program follow-up symbols on the display.( 22 - a,b,c,d). As the washing proceeds, respectively Washing and Drying symbols will be illuminated. When the drying symbol is on, the machine remains silent for about 40-50 minutes. Do not open the door before the completion indicator light is on.
Adding Additional Functions to the Program You may change the program according to your preferences by adding additional functions to the washing program.The washing programs have been designed so as to obtain the best cleaning considering the type of smear, amount of smear and properties of the washing materials.
Page 36
In order to add additional functions to the program; 1-Select the appropriate washing program for your dishes using the up/down buttons (7,8) after pressing the option button. 2- Enter the additional functions menu (4) by pressing the option button. After selecting the additional function using up/down buttons (7,8), illuminate the additional function indicators (9-10-11-12-13-14) by pressing the confirmation button.
Settings Menu In order to enter the Settings Menu, hold the option and delay buttons for 3 seconds. The display will show an expression (“Keep Pressing ..X”) to let you know how many more seconds you have to hold the button. When this number is zero, you will see the Menu settings on the display.
Page 38
4- Brightness level You may adjust the level of your machine’s display brightness here After entering the menu, select the “4- Brightness” by using the selection buttons. Here you will see “brightness :X” (X:L1,L2,L3 ). L1 is the lowest, L3 is the highest brightness level. select the desired brightness level and save the selection by pressing the After pressing the confirmation button, activate “X”...
Page 39
Delayed Start:(Snooze) You may delay the starting time of the selected programme up to 24 hours. You can not make a delay setting after the programme starts. In order for you to be able to make a delay setting, the selected programme needs not to be in operation. 1- Press the delay button (5) 2- Hour “00:00”...
MAINTENANCE AND CLEANING Cleaning the machine in regular intervals prolongs the machine’s service life. Oil and lime may accumulate in the machine’s washing section. In case of such accumulation; -Fill the detergent compartment without loading any dishes into the machine, select a programme that runs at high temperature, and start the machine.
Spray arms Check whether or not the holes for the upper and lower spray arms are clogged. If there is any clogging, remove the spray arms and clean them under water. You can remove the lower spray arm by pulling it upwards, while the upper spray arm nut can be removed by turning the nut to the left.
Page 44
If one of program monitor lights is on and start/Pause light is on and off, Your machine’s door is open, shut the door. If the programme won’t start Check if the plug is connected. • Check your indoor fuses. • Be sure that the water inlet tap is turned on.
If the dishes won't dry up A programme without a dry operation selected. • Rinse aid dosage set too low • Dishes unloaded too fast. • If there are rust stains on the dishes Stainless-steel quality of the dishes washed is insufficient. •...