Table of Contents
Advertisement
Program Selection and Operating Your Machine
delayed start indicator
Select the new program and/or add
the functions as described in Program
Selection and Table of Average
Consumption Values. Resume the
delayed start countdown by pressing the
Start / Pause / Cancel button.
If you want to cancel delayed start
countdown while it is in progress, then press
the Start / Pause / Cancel button for three
seconds. Release the button when
start flashing in the display. For a couple of
minutes the machine will fulfill the necessary
operations required for cancellation.
Remaining time indicator displays "0:00".
You may select and operate a new program
following the delayed start countdown
cancellation process.
If you want to select a new delayed start
time while the delayed start countdown
is in progress, then pause the machine by
pressing the Start / Pause / Cancel button.
Set the desired time by pressing the Delayed
Start Button. Start the countdown for the new
time by pressing the Start / Pause / Cancel
button again.
Salt Indicator
Please check the salt indicator on the display
to see whether there is enough softening salt
in your machine or not. You need to refill the
powder dispenser whenever the salt warning
indicator light lights.
C
If the water hardness level is
stored as (r1), salt indicator will
never come on even if the salt
container is empty. (Adjusting the
water hardness level is explained
in Water Softening System
section.)
26 /36 EN
will start flashing.
symbols
Rinse Aid Indicator
Check the rinse aid warning display on the
screen to find out if there is sufficient amount
of rinse aid in your machine. You must refill
the rinse aid container when the rinse aid
indicator comes on.
C
If the Rinse Aid Indicator is set
to (OFF), rinse aid indicator will
never come on even if the rinse
aid container is empty.
Rinse Aid Indicator Setting
•
When your machine is switched off,
press Half Load
/ Off button to switch it on.
•
Hold Half Load/Tablet Detergent
button pressed and release On / Off
button.
•
Keep Half Load/Tablet Detergent
button pressed for three seconds more.
•
Rinse Aid Indicator comes on and the
stored rinse aid indicator status of your
machine appears on the display in the
format of "ON" or "OFF".
•
You can change the status of the
indicator as "ON" or "OFF" with Start
/ Pause / Cancel button. If you switch
off the machine with "On/Off" button
when the status is "ON", then the
rinse aid indicator will come on when
the rinse aid level in your machine
becomes low while the machine is in
use. If you switch off the machine with
"On/Off" button when the status is
"OFF", then the rinse aid indicator will
never come on.
Starting Your Machine
•
Plug the mains plug into the wall socket.
•
Open the tap.
•
Open the door.
•
Place the dishes.
button and then On
Advertisement
Table of Contents
