Program Selection - Gram OM 62-37 T Instruction Manual

Program Selection and Operating Your Machine
button until Half Load and Tablet Detergent
Indicators illuminate together.
C
If you have used the Half Load
or Tablet Detergent features
during the last programme you
used, Half Load or the Tablet
Detergent function will remain
active in the next washing
programme you will select. If
you do not want to use these
functions in the new programme
you have selected, press the Half
Load / Tablet Detergent button
until the indicator of the relevant
function turns off.
Delayed Start Button
You can delay the start of the selected
program until 9 hours with increments of 1
hour by means of the Delayed Start Function.

Program Selection

You can select the desired program after
turning on the machine by pressing the On /
Off button. Switch to the program you want
to operate by pressing program selection
button. You can follow up the program you
are in from the program indicator on the
screen. Program number will increase by one
each time you press the program selection
button (Number of the defined programs
can change depending on the model you
have purchased). The selected washing
program will start running when the Start /
Pause / Cancel button is pressed
light up. Time indicator will start displaying
the estimated remaining time to the end of
program.
Total time can be different from the
time indicated at the beginning since
it can change while the program
is running, depending on the
temperature of the room where your
machine is installed, temperature
of the supply water, auto-cleaning
of the water softening system
(regeneration) and amount of the
dishes.
symbol
23 / 36 EN