Mounting Over A Washing Machine; Connecting To The Drain; Adjusting The Feet - Grundig GTN 48261 GC User Manual

Installation
Dryer Depth
Stock number
of under-bench 2979700200 2973600200
installation part
Leave at least 3 cm of space around the
ƒ
sides and the rear wall of the product
when installing it under a counter or in a
cupboard.
3.4 Mounting over a washing
machine
A fixing device should be used between
ƒ
the two machines when installing the
dryer above a washing machine.
The fixing device (2977200100
white/2977200400 grey) must be
installed by the Authorized Service Agent.
Total weight of the washing machine
ƒ
and the dryer -with full load- when they
are placed on top of each other reaches
to approx. 180 kilograms. Place the
products on a solid floor that has sufficient
load carrying capacity!

3.5 Connecting to the drain

In products equipped with condenser unit,
water accumulates in the water tank during the
drying cycle. You should drain accumulated
water after each drying cycle.
You can directly drain accumulated water
through the water drain hose supplied with the
product instead of periodically draining the
water collected in the water tank.
Dryer / User Manuel
60 cm 54 cm
Connecting the water drain hose
1. Pull hose in the product by hand in
order to disconnect it from where it
is connected. Do not use any tools to
remove the hose.
2. Connect one end of the drain hose
supplied separately with the product to
the connection point from where you
removed the hose of the product in
previous step.
3. Connect the other end of the drain hose
directly to the wastewater drain or to the
washbasin.
A
CAUTION: Hose must be fixed in
every type of connection. Your house
will be flooded if the hose comes
loose during water discharge.
C
Attach the water drain hose to a
height of maximum 80 cm.
C
Make sure that the water drain hose
is not stepped on, twisted or bent
between the drain and the machine.

3.6 Adjusting the feet

In order to ensure that the product operates
more silently and vibration-free, it must stand
level and balanced on its feet. Balance the
machine by adjusting the feet.
Turn the feet to left or right until the machine
stands level and firmly.
45 / 68 EN