Coin-Cell Battery; Removing The Coin-Cell - Dell 0HRTG Service Manual

Coin-cell battery

Removing the coin-cell

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Disconnect the battery
5. Remove the IO board.
NOTE: The Coin-cell is installed on the IO board.
About this task
Steps
1. Use a plastic scribe to pry up the coin-cell battery from the slot on the IO daughter board.
2. Remove the coin-cell battery from the IO daughter board.
38 Disassembly and reassembly
before working inside your
cable.
computer.