Table of Contents
Advertisement
Installing the display bezel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
Steps
Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place.
Next steps
1. Install the
display
assembly.
2. Reconnect the
battery
3. Install the
base
cover.
4. Install the
SD
card.
5. Follow the procedure in
Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the WLAN.
58
Disassembly and reassembly
cable.
after working inside your
before working inside your
computer.
computer.
Advertisement
Table of Contents
