Speakers; Removing The Speakers - Dell 0HRTG Service Manual

About this task
Steps
1. Place the heatsink on the system board and align the captive screws on the heatsink with the screw holes on the system
board.
2. Tiighten the four captive screws and install the three (M2x4) screws to secure the heatsink to the system board.
Next steps
1. Reconnect the battery
2. Install the base cover.
3. Install the SD card.
4. Follow the procedure in

Speakers

Removing the speakers

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
4. Disconnect the battery
5. Remove the SSD.
cable.
after working inside your
before working inside your
cable.
computer.
computer.
Disassembly and reassembly 45