a)
Bottom chassis cover
b)
Batteries
4. Follow the procedure in
WLAN card
Removing the WLAN card
1. Follow the procedure in
2. Remove the:
a)
Batteries
b)
Bottom chassis cover
3. Remove the single 'M2*3' screw [1] and remove the metal bracket [2] on the WLAN card.
4. Disconnect the antennae cables [3] and remove the WLAN card out from the M.2 slot [4] on the system board.
Installing the WLAN card
1. Install the WLAN card into the M.2 slot [1] on the system board and connect the antennae cables [2].
2. Place the metal bracket on the WLAN card [3] and secure it using the single 'M2*3' screw [4].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
89