Table of Contents
Advertisement
■Definition and terminology
Term
A
Analog current output
Analog output function
Analog voltage output
Auto-preset
Auto-shift
B
Bottom value display (mode)
C
Chattering
Chattering prevention function
Copy destination Pressure
switch
Copy function
Copy source Pressure switch
Refer to "Analog output (function)".
Function to output the voltage or current in proportion to the pressure.
Refer to "Analog output (function)".
Performs pressure setting automatically by detecting the increase and
decrease in pressure. For example, if this function is used for a suction test,
the pressure setting will be completed by performing suction and release of
the workpiece.
A function to correct the set value of the switch output in accordance with the
applied pressure in case the switch operation is unstable due to pulsation of
applied pressure. This function is used in applications such as vacuum
adsorption. The pressure when a signal is externally input is set as a
reference value with which the pressure that turns the switch on or off can be
shifted.
Shows the minimum pressure from when the power was supplied to the
current time.
The problem of the switch output turning ON and OFF repeatedly around the
set value at high frequency due to the effect of pulsation.
A function to delay the response time of switch output in order to prevent
chattering.
A Pressure switch whose settings are copied to when using the copy function.
A function to copy a pressure setting value and function setting (Excludes
finely adjusted displayed values and line names).
A Pressure switch whose settings are copied when using the copy function.
-13-
Definition
No.PS※※-OMU0009-F
Advertisement
Table of Contents
