Table of Contents
Advertisement
Programming Over Project 25 (POP 25)
(ASTRO 25 and ASTRO Conventional)
This feature enables configuration data to be upgraded to your
radio over-the-air. This feature retains full use of the radio
during the configuartion data transfer without interrupting
communication. The upgrade pauses to give priorities to voice
call, and continues after the voice call ended.
Once a configuration upgrade is downloaded to your radio, you
can install new changes immediately or delay changes to be
installed on the radio when it is being powered up. Your radio
can also be configured to allow you to accept or reject an
upgrade.
Note:
This feature must be preprogrammed by a qualified
radio technician. Check with your dealer or system
administrator for more information.
Responding to the notification of Upgrade
Procedure:
1
The display shows Upgrade?.
2
Press the Menu Select button below Acpt to accept the
request to upgrade immediately. The display shows
Upg Rx In Prog to indicate the upgrade received is in
progress.
OR
Press the Menu Select button below Dlay to delay the
request to upgrade. The radio prompts to upgrade in the
next power up of your radio.
OR
Press the Menu Select button below Rej to reject the
request to upgrade. The display shows Upg Aborted. The
radio continues to function with the current configuration
until it gets reprogrammed.
3
If the upgrade is successful, the display shows Program
done.
OR
If the upgrade failed, the display shows Program failed.
The radio remains in current configuration.
If your radio has problem of upgrade over-the-air, consult the
qualified technician for details.
95
English
Advertisement
Table of Contents
