Table of Contents
Advertisement
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3.
Do one of the following:
Extend the server from the rack (Extending the server from the rack).
•
•
Remove the server from the rack (Removing the server from the rack).
4.
Remove the access panel (Removing the access panel).
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server
in this manner results in improper airflow and improper cooling that can lead to thermal damage.
5.
If installed, remove the butterfly riser cage (Removing a butterfly PCIe riser cage).
6.
Remove the primary PCIe riser cage (Removing a primary PCIe riser cage).
7.
Remove the air baffle (Removing the air baffle).
8.
If installed, do one of the following:
•
Remove the processor mezzanine tray (Removing and replacing the processor mezzanine tray).
•
Remove the CPU Mezzanine UPI performance kit (Removing and replacing a CPU Mezzanine UPI performance kit
board).
9.
Remove the fan cage (Removing and replacing the fan cage).
10. To remove or reroute cables, remove the fan cage holders (Removing and replacing the fan cage holders).
11. Disconnect the cables from the drive cage backplane.
12. Do the following.
Remove the NVMe hard drives (Removing and replacing an NVMe drive).
•
Remove the SAS/SATA hard drives (Removing and replacing a hot-plug SAS or SATA drive).
•
13. Remove the drive cage.
64
Removal and replacement procedures
Advertisement
Table of Contents
