Leaning Post (Optional) - Quicksilver Activ 605 Open Owner's Manual

Quicksilver 605OP — System & Component Overview and Operation
Bow Sun Lounge Kit and Extension
Sun Lounge Extension

16. Leaning Post (optional)

The standard configuration for helm seating is two bucket seats, however your boat can also be
equipped with an optional leaning post with storage. The leaning post consists of a leaning post base,
a leaning post lid, cushion, and footrests. Located inside on the port side of the leaning post storage is
a 12v 17L electric cooler. The cooler is protected by a breaker located next to the battery switch panel
in the cockpit.
Sun lounge may shift while underway. Verify that the outer
sun lounge panels are fully engaged into the deck support
slots and the center sun lounge panel locks in position.
Bow sun lounge kit
Console back rest
Console seat cushion
Bow conversion cushion
Bow seat filler cushion
Sun lounge filler panel
Starboard extension cushion
Starboard extension panel
Port extension cushion
Port extension panel
25