Table of Contents
Advertisement
Available languages
Available languages
Fig. 6
Fig. 7
Fig. 8
QC - Clear
Adapter
Straw
Fig. 9
Fig. 10
(GHA)
Fig. 11
Fig. 12
8
en
Fig. 13
Lance and Detergent bottle
•
While the spray gun is in the locked position, insert the turbo lance, the
adjustable spray lance, or the detergent bottle directly into the end of
the spray gun by inserting and pushing together and turning clockwise
simultaneously (Fig. 6). To remove push together and turn counter
clockwise Push the safety lock button to lock the trigger on the spray
gun when changing lances or detergent tank, to ensure that they do not
accidentally eject with force during removal.
•
When using the turbo lance, make sure the turbo nozzle is screwed
on tight at the end of the lance, each time you use it. The Turbo lance
is designed for high impact cleaning. Only use on hard surfaces such
as driveways, cement surfaces, patio bricks, etc. A test strip should be
done prior to avoid chance of damaging the surface.
•
When using the adjustable spray lance, the spray pattern and intensity
can be controlled according to power of water needed for each task by
twisting the spray nozzle at the far end of the lance (Fig. 7). These can
be used for sweeping leaves or debris from flat surfaces or curbing. This
lance has the widest variety of applications as the fan degree allows for
good impact pressure and cleaning coverage.
•
When using the detergent bottle, fill it with a properly formulated
detergent or cleaner with water ratio according to instructions on the
container (Fig. 8). The detergent bottle comes with a straw which is
fitted into the screw-on top. If you don't see the straw, look inside the
bottle and attach it to the screw-on top (Fig. 9).
Note: the ratio of water to detergent is 10:1 or 10 parts water to 1 part
detergent.
Garden Hose Adapter
•
Install the garden hose adapter (GHA) and quick connect filter. It is
made up of two separate pieces. (1) A clear plastic adapter with a
screen filter (about 3 inches long) and (2) a blue/black collar attachment
Garden Hose
Adapter (GHA)
(Fig. 10).
•
First, remove the plastic shipping cover on the water inlet on the front
of the power washer. Attach the clear plastic adapter by screwing it into
the water inlet (Fig. 11). Hand tight is fine. Next screw on the blue/black
collar attachment to your garden hose (Fig. 12). Slide the blue/black
collar onto the clear adapter (Fig. 13), it will "click" into place. The
water is now connected to your power washer.
•
To remove the water hose, simply pull back on the blue collar and it will
slide off the clear adapter. Note: this can be done at any time. Water
will not come out of the garden hose as the blue/black collar has a
water check valve. Water will only flow from the garden hose when it is
connected to the clear adapter.
•
You have now completed the assembly of your BLUE CLEAN POWER
WASHER and are now ready to begin using your electric power washer.
Read and observe all safety instructions.
Advertisement
Chapters
Table of Contents
