AR Blue Clean AR383 Assembly And Operation Manual

A
ssembly
1
2
7
8
3
6
4
5
P c
ackage ontent
1. Pressure Water Unit
2. Manual
3. Adjustable Spray Nozzle
4. Turbo Nozzle
5. Gun
6. Detergent Tank
7. Nozzle Cleaning Tool
8. High Pressure Hose
9. Garden Hose Fitting
10. Accessories Holder
Gun Safety Button (5A)
2
2. Install with supplied
screws. Tools needed 1
phillips screwdriver.
3
3. Garden hose adapter. Marked
Pump and Hose for easy assembly.
Washer/filter may need to be re-
installed as it may separate during
shipping. Place washer/filter into
the hose side as illustrated.
A
ssembly And
4
Hose reel Pump
for
1
Hose reel for
STORAGE
Storage Use only
use ONLY
4. a) Remove shipping
10
cap from back of pres-
sure washer.
b) Install threaded
end of high pressure
hose by pushing into
back of pressure washer
9
then turn clockwise until
tight.
5A
7
:
7. a) Remove shipping
cap from front of pres-
sure washer.
b) Attach garden
hose adapter with the
pump end onto the front
of the pressure washer.
c) Make sure filter
is in place on hose side
attach the garden hose.
10
10. a) Unlock gun push lock from
right to left.
b) Pull trigger then turn on
power switch located on back of
pressure washer.
O
perAtiOns
5
5. a) Install non-threaded
High Pressure Hose
end of high pressure hose to
gun.
b) Press release button
on bottom of gun toward
back of the gun, then insert
high pressure hose.
8
Pump
Garden
Hose
Garden
Hose Trigger
Adapter
8. Activate the lock by
holding the gun and push
the lock from left to right.
Squeeze trigger to make
sure the trigger does not
move. The safety trigger
lock should be locked at
all times when pressure
washer is not in use.
Off
s
heet
O
perAtiOns
6
6.
gun by pushing and turning
clockwise at the same time.
terclockwise to remove.
9
Gun Safety
Button
1
2
9.
into a grounded 120V outlet
and press the reset button as
shown.
EACH TIME THE UNIT IS
PLUGGED IN AN OUTLET.
On
Ar383
a) Insert lance into the
b) Push and turn coun-
Reset
a) Plug the power cord
b) THIS MUST BE DONE
11
11. Spray pattern shape
and intensity can be
changed by twisting the
spray adjuster at the
end of the lance. KEEP
HANDS CLEAR OF THE
FRONT OF THE LANCE
TO PREVENT INJURY.
NOTE: Turbo nozzle is
not adjustable.