Page 1
Instruction Manual Model AR383S OFF/O ON/I 383S Customer Help Line 1-866-235-5112 WARNING: To reduce the risk of injury, the user must read and understand the instructions before using this product. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE www.arblueclean.com AR383S-92729-DR...
uick tart uide ackage ontent 1. Power washer unit 2. Manual 3. Nozzle cleaning wire (may be taped to the manual) Hose Reel 4. High pressure hose For Storage Only 5. Spray gun holder 6. Nozzle tray 7. Screws (1 for nozzle tray) 8.
Page 3
7. Connect lances to spray 8. The adjustable spray nozzle gun, insert lance into spray had has two (2) positions: • gun, push together and OUT position IN position IN position for high pressure at the same time twist spray. Designed to use for clockwise to lock in place.
Max Temp Volts Amps Weight (lbs) (lbs/sq/in) (gal/per/min) AR383S 1,800 122° F imited arranty This product is under warranty to the original retail consumer against defects in material and workmanship for a period of 1 (one) year and is a complete “bumper to bumper” warranty including the spray gun, the high pressure hose and all accessories from the date of purchase.
ntroduction Congratulations on the purchase of your BLUE CLEAN POWER WASHER! Your BLUE CLEAN POWER WASHER is a power tool in every sense of the word that may be used outside your house and in. It is one of the finest most powerful home-use power washers in the marketplace today.
Page 6
• When you press the power switch to turn off • Never disconnect the high pressure hose the power washer, water pressure may remain from the power washer while the system is in the system. To discharge the pressure, pressurized. point the spray gun in a safe direction and •...
& a nPacking SSembLy • After unpacking the BLUE CLEAN POWER WASHER, lay out parts and accessories. Familiarize yourself with the parts in the package by comparing them to those listed on the “PACKAGE CONTENTS” page. • The BLUE CLEAN POWER WASHER requires some minor assembly. You’ll need a Phillips screwdriver to install the high pressure hose hook and the nozzle tray.
Page 9
High Pressure Hose • Screw the high pressure hose (clockwise) on the left of the unit at the bottom (Fig. 4). Pull back the collar and insert o-ring post into the water outlet far enough so the collar can thread onto the outlet threads until hand tight.
Page 10
Spray Gun • To lock the trigger of the spray gun aim the gun away from you and push the lock button from right to left, (Fig. 7), after doing so, squeeze or pull the trigger to make sure it is locked and will not move.
Page 11
• The adjustable spray nozzle had has two (2) positions (Fig. 10): OUT position IN position High Pressure Setting Low Pressure Setting OUT position IN position Fan Spray Low Pressure Setting High Pressure Setting Pencil Stream Pencil Stream Fig. 10 IN position for high pressure spray.
Page 12
Garden Hose Adapter Install the garden hose adapter (GHA) and quick connect filter. It is made up of two separate • pieces. (1) A clear plastic adapter with a screen filter (about 3 inches long) and (2) a blue/black collar attachment (Fig. 13). QC - Clear Adapter Garden Hose...
Perating nStrUctionS *!Turn on the water supply at the faucet.!* (Fig. 17) OFF/0 OFF/0 ON/I ON/I Fig. 17 Fig. 18 Powering Up • Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international symbols for ‘on’ and ‘off’: On (|) Off (O), (Fig. 18). •...
Lean Cleaning nozzles A clogged or partially clogged nozzle can cause significant reduction of water pressure coming out • of the nozzle and/or cause the unit to pulsate while spraying. • Turn off the unit • Turn off the water supply to the unit •...
Page 15
• Never use a narrow high pressure stream of water or the turbo lance on soft surfaces susceptible to damage. • Use the high/low nozzle lance when cleaning windows. Be sure to adjust the nozzle to low spray and place the nozzle approximately four to five feet away from the window with the nozzle at forty five degree angle.
torage • Remove lance from the gun and place in the accessory holder. Place the gun in the accessory holder one the side. Lances are placed into any of the slots in the back of the unit. Make sure to discard any remaining detergent from the bottle. Flush the bottle and nozzle head with fresh water to prevent clogging.
aver Pump Saver is a product that protects and prolongs the life of the pump. This will keep the internal parts of the pump lubricated and protected from freezing while being stored in ALL climates. It also assists with protection from internal corrosion. The Blue Clean part # is: PW64511 (16oz. bottle). Order online at www.arblueclean.com Pump Saver Instructions Follow the previous storage instructions for your power washer.
roUbLeSHooting and Unit will not turn on. Make sure the power washer is in the “OFF” position. Plug in the electrical cord to a grounded 120 volt outlet (no electrical extension cord should be used). If the electrical cord will not plug into your outlet, your electrical outlet is not properly grounded and should not be used.
Page 20
Model AR383S OFF/O ON/I 383S Cleaning and troubleshooting tips, manuals and other helpful information are available on our website. For parts and accessories for your Blue Clean Washer, visit www.arblueclean.com. Ordering is easy and all major credit cards are accepted.
Need help?
Do you have a question about the AR383S and is the answer not in the manual?
Questions and answers