It is one of the finest most powerful home-use power washers in the marketplace today. AR116 features include: A proprietary, all-aluminum, water pump. A full 12-month “bumper to bumper” warranty on the power washer and all parts/accessories.
• To avoid mishaps or injury, always use the trigger safety lock when not using the power washer even if the spraying stops for a moment. • The power washer is equipped with a Ground Fault Circuit Interrupter (GFCI) which greatly reduces the chance of electric shock while the unit is in use.
Page 5
• Never permanently engage the trigger mechanisms on the spray gun. • Never operate the power washer unless all components are properly and securely connected. • Never allow the power washer pump to run for more than one minute, after you have turned off the water supply. This can cause the motor and pump to overheat and fail.
& a npackIng SSembly nStructIonS Pump • After unpacking the BLUE CLEAN POWER WASHER, lay out the parts and accessories. Familiarize yourself with the parts in the package by comparing them to those listed on the “PACKAGE CONTENTS” page. High Pressure Hose • The BLUE CLEAN POWER WASHER requires some Fig.
Page 8
turning clockwise simultaneously (Fig. 5). To remove push together and turn counter clockwise. Push the safety lock button to lock the trigger when changing the lance or the detergent bottle, to ensure that they do not accidentally eject with force during removal. • When using the adjustable spray lance, the spray pat- tern and intensity can be controlled according to power of Fig.
peratIng nStructIonS Reset Turn on the water supply at the faucet. Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international symbols for ‘on’ and ‘off’: On (--) Off (O), (Fig. 12). Unwind the power cord completely and plug the GFCI into Fig.
Page 10
• Take off the adjustable lance. Rotate the nozzle on the adjustable lance to the narrow stream setting which opens up the fan blades (Fig. 15). • Using the nozzle tip cleaner provided (or an unfolded paper clip), insert the wire into the nozzle hole and move back and forth until debris is dislodged (Fig.
effective and can be better than scrubbing if applied properly. Always spray detergent on a dry surface, do not pre-soak area. Wetting the surface first dilutes the detergent and reduces its cleaning ability. Do not allow detergent to dry on surface. On vertical surfaces being cleaned, apply detergent to lower surfaces and work your way up to prevent detergent from causing streaks in the Fig.
aver Pump Saver is a product that protects and prolongs the life of the pump. This will keep the internal parts of the pump lubricated and protected from freezing while being stored in ALL climates. It also assists with protection from internal corrosion.
roubleShootIng and Unit will not turn on. Make sure the power washer is in the “OFF” position. Plug in the electrical cord to a grounded 120 volt outlet (no electrical extension cord should be used). If the electrical cord will not plug into your outlet, your electrical outlet is not properly grounded and should not be used.
Max Temp Volts Amps Weight (lbs) Model (lbs/sq/in) (gal/per/min) AR116 1,450 1.35 122° F ImIted arranty This product is under warranty to the original retail consumer against defects in material and workmanship for a period of 1 (one) year and is a complete “bumper to bumper” warranty including the spray gun, the high pressure hose and all accessories from the date of purchase.