Page 1
1750 PSI Electric Pressure Washer ASSEMBLY, CARE AND USE INSTRUCTIONS Model AR 165 S-Q READ CAREFULLY IMPORTANT: RETAIN THESE INSTRUCTIONS ATTACH RECEIPT TO MANUAL FOR FUTURE REFERENCE. Questions, problems, missing parts? Before returning to your retailer, call (1-866-235-5112) or email (info@arnorthamerica.com) our customer service department.
SAFETY INFORMATION SAFETY INFORMATION SAFETY INFORMATION Please read and understand this entire manual before 9. DO NOT use your power washer when you are under attempting to assemble and operate the product. the influence of alcohol or drugs. Use this power tool carefully and only when you are alert.
Page 5
35. NEVER use lances or other parts that are not to protect pumps. compatible for this specific AR Blue Clean unit. 36. NEVER use an extension power cord since it defeats 27. NEVER use hot water with your power washer. It will the effectiveness of the GFCI and increases the overheat and damage the high pressure pump.
PREPARATION PREPARATION PREPARATION Before beginning assembly of product, make sure all Tools Required for Assembly (not included): Phillips parts are present. Compare parts with package contents screwdriver. list and hardware contents list. If any part is missing or damaged, DO NOT attempt to assemble the product. Please call customer service at 1-866-235-5112.
Page 7
ASSEMBLY INSTRUCTIONS Trigger Active Button In: Safety On Attach High pressure hose (D) to Spray gun (E) by pulling back on lock, and inserting hose. Trigger Inactive To release the hose from the spray gun (E), press the To lock the trigger of the spray gun (E) aim the button on the underside of the gun toward the trigger gun away from you and push the lock button guard.
Page 8
PREPARATION ASSEMBLY INSTRUCTIONS Turn for 0° Nozzle Turn for Fan Spray The adjustable spray nozzle (G) can vary between a high If lower pressure and more coverage is desired, with the pressure, 0° concentrated beam and a low pressure nozzle pointing away from you (and others), twist the large fan spray.
Page 9
OPERATING INSTRUCTIONS ASSEMBLY INSTRUCTIONS Install the quick connect filter (J) to water inlet, hand tightening clockwise. Attach a garden hose to garden hose adapter (I). Note: Flush out garden hose before connecting to QC garden hose adapter. Push the QC garden hose adapter (I) onto the clear quick connect (J).
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS • Release the spray gun trigger to stop the power washer. • Allow the motor to come to a complete stop before squeezing the trigger again. • Squeezing and releasing the trigger rapidly will cause the auto start feature to miss an on/off cycle that may prevent it from turning on properly.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS How to Avoid Damaging Surfaces • This system applies detergent under low pressure. • Damage to surfaces being cleaned occurs because The cleaning power of the detergents is enhanced the impact force of the water pressure exceeds the when applied with low pressure and enough durability of the surface.
Page 12
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS CARE AND MAINTENANCE • Turn off the unit. move back and forth until debris is dislodged. • Turn off the water supply to the unit. • Tap quick connect end of lance on hard surface • Relieve any pressure trapped in the hose by squeezing several times.
CARE AND MAINTENANCE OPERATING INSTRUCTIONS CARE AND MAINTENANCE • Store the accessories on the power washer unit like below: PUMP SAVER Pump Saver is a product that protects and prolongs saver bottle firmly into clear quick connect filter (J), the life of the pump. This will keep the internal parts previously installed to pressure washer inlet.
Page 14
CARE AND MAINTENANCE TROUBLESHOOTING If you have any questions regarding the product, please call customer service at 1-866-235-5112. PROBLEM CORRECTIVE ACTION Unit will not turn on. 1. The GFCI module on the end of the power cord must be plugged directly into an outlet. 2.
TROUBLESHOOTING CARE AND MAINTENANCE TROUBLESHOOTING PROBLEM CORRECTIVE ACTION The power washer 1. It sounds like your power washer is working just fine. When the water is connected, turns on for the accessories are assembled properly, and the power switch is turned on, the power 2 seconds, shuts washer may turn on for 1 - 2 seconds to prime the pump.
LIMITED WARRANTY REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-235-5112, 8:00 a.m. - 5:00 p.m., CST, Monday - Friday or order online at www.arblueclean.com PW909165S-Q PART DESCRIPTION PART # PART DESCRIPTION PART # Detergent Tank PW4560060 Quick Connect Filter PW3082130...