Genie GCL-LJ Series Manual page 21

WIRE THE OPERATOR
Wire Door Lock - (Optional)
1. Plug door lock harness into the LOCK plug on bottom of operator. Insert plug in correct direction (see inset)
2. Run wire down the wall to the door lock and secure with supplied wire staples.
NOTE: Door lock wires are polarity sensitive.
3. Cut off excess wire, strip 1/4" of insulation and attach to bottom connectors on door lock.
4. Install WHITE wire to W terminal and STRIPED wire to B/W terminal.
ALL WIRE CONNECTIONS LOCATED AT BOTTOM OF OPERATOR
Door Lock Plug
Door Lock Wire Connections
19