Toro 29516 Operator's Manual page 28

WARNING
Hydraulic fluid escaping under pressure
can penetrate skin and cause injury. Fluid
accidentally injected into the skin must be
surgically removed within a few hours by
a doctor familiar with this form of injury or
gangrene may result.
– If equipped, make sure all hydraulic
fluid hoses and lines are in good
condition and all hydraulic connections
and fittings are tight before applying
pressure to hydraulic system.
– Keep body and hands away from
pinhole leaks or nozzles that eject high
pressure hydraulic fluid.
– Use cardboard or paper, not your hands,
to find hydraulic leaks.
– Before performing any work on the
hydraulic system:
– Safely relieve all pressure in the
ground drive hydraulic system by
placing the motion control levers in
neutral and shutting off the engine.
– Safely relieve all pressure in the
auxiliary hydraulic system by shutting
off the engine, turning the ignition
switch to the "ON" position, and
pressing the tine ground engagement
switch. Once the tines have lowered
to the ground, release the tine ground
engagement switch and turn the ignition
switch to the "OFF" position.
•
Keep hands and feet away from moving parts.
If possible, Do Not make adjustments with the
engine running. If the maintenance or adjustment
procedure require the engine to be running and
components moving, use extreme caution.
WARNING
Contact with moving parts or hot surfaces
may cause personal injury.
Keep your fingers, hands, and clothing
clear of rotating components and hot
surfaces.
•
Check all bolts frequently to maintain proper
tightness.
28