Safety; General Safety; Safe Operating Practices - Toro 29516 Operator's Manual

Safety

General Safety

Important:
The addition of attachments made
by other manufacturers that do not meet ANSI
certification may cause noncompliance of this
machine.
This product is capable of amputating hands and feet.
Always follow all safety instructions to avoid serious
personal injury or death.
•
Do not put your hands or feet near moving
components of the machine.
•
The owner/user can prevent and is responsible
for accidents or injuries occurring to people, or
damage to property.
•
Any use of this machine other than aerating
turf grass could prove dangerous to you and
bystanders.
•
Stop the machine, shut off the engine, and remove
the ignition key before servicing, fueling, or
unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.

Safe Operating Practices

The following instructions are from ANSI B71.4-2017.
Training
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
All operators and mechanics should be trained.
The owner is responsible for training the users.
•
Never let children or untrained people operate or
service the equipment. Local regulations may
restrict the age of the operator.
•
The owner/user can prevent and is responsible
for accidents or injuries occurring to himself or
herself, other people, or damage to property.
Preparation
•
Locate and mark underground hazards.
•
Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job. Use only accessories and
attachments approved by the manufacturer.
•
Wear appropriate clothing; including safety
glasses, long pants, substantial, slip-resistant
footwear, gloves, and hearing protection. Tie back
long hair. Do not wear loose clothing or loose
jewelry.
•
Inspect the area where you will use the equipment
and remove all objects from the area before using
the machine.
•
Check that the operator's presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
Safe Handling of Fuels
•
To avoid personal injury or property damage, use
extreme care in handling fuel. Fuel is extremely
flammable and the vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or add fuel with the
engine running.
•
Allow the engine to cool before fueling.
, which
•
Do not fuel or drain the machine indoors.
•
Do not store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or on other appliances.
•
Do not fill containers inside a vehicle, on a truck,
or on a trailer bed with a plastic liner. Always place
containers on the ground away from your vehicle
before filling.
•
Remove equipment from the truck or trailer and
fuel it on the ground. If this is not possible,
then add fuel with such equipment as a portable
container rather than from a fuel-dispenser nozzle.
•
Keep the nozzle in contact with the rim of the fuel
tank or container opening at all times until fueling
is complete. Do not use a nozzle lock-open device.
•
If fuel is spilled on clothing, change your clothing
immediately.
•
Do not overfill the fuel tank. Replace the fuel cap
and tighten it securely.
Operation
•
Always shut off the engine, remove the key (if
equipped), wait for all moving parts to stop,
and allow the machine to cool before adjusting,
servicing, cleaning, or storing the machine.
•
Do not operate the machine when there is the risk
of lightning.
4