Nikon ECLIPSE E600 Instructions Manual page 34

5. Troubleshooting Tables
2 Electrical system
Problem
Cause Countermeasure
The lamp does not light when
The power is not being supplied. Plug the power cord into an outlet. (p.29)
The power cord is not connected to the
the power switch is turned on.
t th . .
microscope. Connect the power cord (p. 29)
The lamp has not been installed. Install the lamp. (p. 26)
The lamp is burned out. Replace the lamp. (p. 26)
The specified lamp is not being used.
Use the specified lamp (refer to the electrical
The lamp flickers;
the brightness is unstable.
specifications on p. 35). (p. 26)
The lamp is near the end of its life. Replace the lamp. (p. 26)
The power cord is not connected securely. Secure the connection. (p. 29)
The lamp is not plugged into its socket Insert the lamp securely into its socket.
securely. (p. 26)
The lamphouse is not connected to the
microscope securely. Connect the lamphouse securely. (p. 26)
33