Microscobp ツ - Nikon ECLIPSE E600 Instructions Manual

Microscopy
The general procedure for microscopy is described below.
For details on each step, refer to the corresponding item in chapter "3. Operation of Each Part."
If the microscope has not yet been assembled, see chapter "4. Assembly" first.
Turn on the power.
(Flip the switch to the
« | " side.)
As soon as the power
comes on, the switch
lights.
Flip the switch to
the " | "side.
Set the brightness adjuster
to give the desired
brightness.
Pressing the auto-photo
switch will set the voltage
for the brightness that
provides the best color
reproduction. (p. 21)
Adjust the
Insert filters ND 16 or 4 Insert filters. — brightness.
and NCBII into the Auto-photo switch
optical path. can be pressed.
ND 16 or 4 reduces glare in
the binocular eyepiece.
NCB11 improves color
reproduction. (p. 20)
Move the 10x objective
into the optical path.
Rotate the revolving
nosepiece until the 10x
objective clicks into place.
El Set the
10x objective.
Set the specimen in place
with the cover glass facing
up.