Pepperl+Fuchs AVS78E Manual

Function
This absolute rotary encoder returns a position value corresponding to the shaft position via the SSI interface.
In order to obtain the position data, the controller sends a start sequence to the absolute rotary encoder. The encoder then responds
synchronously to the pulses from the controller with the position data.
The modular design enables you to order the absolute rotary encoder so that it fulfills your requirements. A listing of the part options can be found
in the ordering information.
You can select the counting direction via 2 functional inputs and set the zero position.
Dimensions
Encoder length L
Version
Radial cable exit Clamping flange
Servo flange
Axial cable exit Clamping flange
Servo flange
ø69 ±0.1 ø 3, 8 deep
ø48 ±0.1
3 x M3, 6 deep
3 x 120°
3 x M6,
3 x M4, 6 deep
6 deep
3 x 120°
3 x 120°
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Pepperl+Fuchs Group USA: +1 330 486 0001
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com
Singleturn absolute encoder
AVS78E Mining
< Up to 16 Bit singleturn
< ATEX-approval for mining
<
IECEx approval
<
Flameproof enclosure
<
Removable connection cap
< Galvanically isolated RS 422 interface
Length L
118 mm
118 mm
134 mm
134 mm
L 20
16 5
15
Clamping flange, cable exit radial
Germany: +49 621 776 1111
fa-info@de.pepperl-fuchs.com
78
3.5 Nm
±0.5 Nm
54
Singapore: +65 6779 9091
fa-info@sg.pepperl-fuchs.com
1