Cut-Out Shapes
Shapes and graphics can be added to your label. Shapes are added to your label through the Graphic
Object. To add a shape to your label:
1. Touch the Editor screen where you want the shape to be added.
2. In the Add Object control panel, touch Graphic.
3. On the Select Graphic dialog box, under Category, touch Shapes.
4. From the list under Shapes, touch the desired shape.
The selected shape is displayed in the Editor.
5. Select the color for the shape.
6. Choose to display as an outline or have it filled in with color.
Note: Changing back to outline format from a fill pattern leaves the outline in the color that was
previously selected for the fill. For instance, if you elected to fill the shape with the color red,
when reverting back to outline format, the outline displays in red.
Refer to
"XY Cutting" on page 57
BradyPrinter S3700 User Manual
for information on cutting out shapes.
Formatting Labels
Cut-Out Shapes
52