Print Speed; Adjusting Print Offset - Brady BradyPrinter S3700 User Manual

3. In the Print Energy area, touch the appropriate box to increase or decrease the print energy
level.
Note: By default, the print energy is at the nominal setting for the best overall performance.
Because the nominal setting is programmed into the touch cell, the selected print energy
setting stays in effect for all subsequent print jobs with the currently installed media. When
new media is installed, the print energy level is reset to the default setting. The print energy
level is also reset by rebooting the system.
4. If no further adjustments need to be made, press OK.

Print Speed

You can change the print speed to be faster or slower than the default print speed of the installed
media. Reducing the print speed produces better print quality at the expense of speed. Higher speed
can result in fainter print.
To adjust the print speed:
1. With a label in the Editor, touch Print.
2. In the Print dialog box, touch Advanced Settings.
3. Press Print Speed button.
4. In the Print Speed area, touch the appropriate box to increase or decrease the print speed.
The selected print speed setting stays in effect for all subsequent print jobs with the currently installed
media. When new media is installed, the print speed level is reset to the default setting. The print
speed level is also reset by rebooting the system.

Adjusting Print Offset

Print offset moves the image slightly in one direction or another on the label. Adjust Offset is typically
used to do a fine adjustment of the printed image on a die-cut label, or to move the image slightly
closer or further from the edge of a continuous supply.
Horizontal Offset shifts the printed portion of the label to the right or left. Vertical Offset shifts the
printed portion of the label up or down.
To adjust the print offset:
1. In the Adjust Offset area, touch the horizontal and/or vertical offset data field and enter the
adjustment value.
2. When finished with Advanced Settings, touch OK.
You are returned to the Print dialog box.
3. When ready to print, touch Start Print.
BradyPrinter S3700 User Manual
Printing
Advanced Settings
56