Brady BradyPrinter S3700 User Manual page 87

4. Under Tape width: touch the desired Tape Width, then touch Next.
5. In the Pipe contents dialog box, choose the type of material that flows through the pipe.
6. Touch the up/down arrows to view more options in the list.
7. When found, touch the desired contents option to select it, then touch Next.
8. On the Legend screen, touch Legend line 1: data field, and enter the text to display on the
label.
9. You can add additional data in the Legend line 2: field, then touch Next.
Note: You can add up to four graphics to the pipe marker label. The available graphics are divided
into categories.
To change to another category:
10. Touch Change Category.
11. Under Categories, touch the up/down arrows to view more categories in the list.
12. Touch the desired category to select it, then touch OK.
13. On the Graphics screen, touch the left or right double arrows to scroll through the list of
available graphics.
14. Touch the desired graphic in the list.
15. Repeat the above two steps to add another graphic.
16. When ready, touch Finish.
Symbol or Arrow Tape Pipe Marker
The ArrowTape Pipe Marker application uses continuous media only. The Arrow Tape application
includes a single graphic (or arrow), rotated 90 degrees, repeated the length of the label.
To create a symbol or arrow pipe marker:
1. From the Home Page, touch Pipe Marker, then touch Create New File.
OR
Access Pipe Marker label type according to previous procedures.
2. On the Pipe Marker Style screen, touch Symbol or Arrow Tape.
3. In the Dimensions dialog, touch the Pipe diameter: data field and enter the diameter of the
pipe to which the label will be affixed.
4. Under Tape width: touch the desired Tape Width, then touch Next.
BradyPrinter S3700 User Manual
Label Types
Application Label Types
78