Brady BradyPrinter S3700 User Manual page 68

Adjusting Cutter Accuracy
Note: Overtime, the plotter cutter accuracy may drift. Use the Adjust XY Cut Accuracy feature to
bring the offset back to factory settings. To adjust the cut accuracy:
1. On the MainEditor Screen, touch the screen and type any text character,
for example the letter "A".
2. Touch the Print Button.
3. Touch Advanced Settings.
4. Touch XY Cut Settings.
5. Touch Adjust XY Cut Accuracy.
6. Touch Print Test Shape.
7. Examine the printout and input the number where the cut path intersects the printline.
8. Repeat Step 6 and 7 until the output meets expectation.
9. Press OK to save the adjustment.
Depending on how the shape is cut, you can change the numbers in the horizontal and/or vertical
cutting guides data fields for more accuracy.
10. When ready, touch OK.
You are returned to the XY Cut Settings screen.
11. Touch Cancel to exit the XY Cut Settings screen.
12. On the Advanced Settings screen, touch OK.
13. On the Print screen, touch Start Print.
The label prints out with the shape cut out.
BradyPrinter S3700 User Manual
Printing
XY Cutting
59