Brady BradyPrinter S3700 User Manual page 78

8. Touch the End Value data field and enter the ending value for the range that you want
displayed on the gauge.
Note: The Start and End Value of the In-Range Zone must fall within the Start and End Value of the
overall gauge range, previously set in My Gauge Range.
Note: The Caution Zone is optional. The Caution Zone provides a visual element that announces
when you are reaching the In-Range Zone. (The Caution Zone is depicted by the yellow area
on the preceding graphic.)
To set up a Caution Zone:
9. Touch the option box describing where you want the Caution Zone to display on the gradient
(Before or After).
10. Touch the data field for the selected option box and enter the requested value (Start if Before,
End if After).
11. When ready, touch Finish.
Gauge Colors
You can change the color of the ranges on the gauge. This is a good idea, especially if the In-Range
Zone represents a detrimental scenario. For instance, for a car temperature gauge, you may want the
In-Range Zone to display in red, indicating the engine is getting too hot.
To change the color of a circle gauge zone:
1. In the Circle Gauge Label control panel, in More Options, touch the Right arrow to move to the
Colors control panel.
2. Under Colors, touch the option whose color you want to change (Out-of-Range, In-Range, or
Caution).
3. On the Choose the Object Color screen, touch the color you want to apply to that zone.
Note: If the color you selected is not installed on the printer, a message displays telling you to install
the color at the time of printing.
4. When ready, touch OK.
You can also have the gauge outline display with a thicker and darker boundary.
To better display the gauge outline:
5. On the Colors screen, touch Show Black Outline option box to select it.
6. Touch the line thickness option desired (Narrow, Medium, or Wide).
Cut Out Gauge
The printer has the ability to cut out the circle gauge to get the circle shape.
To indicate you want to cut out the gauge:
1. In the Circle Gauge Label control panel, in More Options, touch the Left arrow to move to the
Print/Cut control panel.
BradyPrinter S3700 User Manual
Label Types
Application Label Types
69