Set Up With Smartphone/Tablet, Pc/Notebook Via Bluetooth; Preparations - Vega VEGABAR 82 Quick Setup Manual

6 Set up with smartphone/tablet, PC/notebook via Bluetooth
Activate Bluetooth
Change sensor PIN
16
6 Set up with smartphone/tablet, PC/
notebook via Bluetooth
6.1

Preparations

Make sure that the Bluetooth function of the display and adjustment
module is activated. For this, the switch on the bottom side must be
set to " On".
1
Fig. 6: Activate Bluetooth
1 Switch
On = Bluetooth active
Off = Bluetooth not active
The security concept of Bluetooth operation absolutely requires that
the default setting of the sensor PIN be changed. This prevents unau-
thorized access to the sensor.
The default setting of the sensor PIN is " 0000". First of all you have
to change the sensor PIN in the adjustment menu of the sensor, e.g.
to " 1111":
1. Go to setup via the extended operation
2. Lock operation by changing sensor PIN
3. Enable operation again by entering the sensor PIN once more
On
O
VEGABAR 82 • 4 ... 20 mA