Connections Overview - Rvm Variant Displays; Connections Overview - S Variant Displays - Raymarine AXIOM 2 PRO Installation Instructions Manual

9.2 Connections overview — RVM variant
displays
The following connections are available on Axiom® 2 Pro RVM variant
displays:
1. GPS Antenna — Enables connection of an optional external passive
GNSS (GPS) antenna (e.g.: GA200, part number A80589).
2. Accessory — Enables connection of an external card reader, such as the
RCR-SD/USB (part number A80440).
3. HDMI Out — Enables connection of an external HDMI monitor or HDTV,
using the Micro HDMI (Type D) to HDMI cable (part number A80723). The
external monitor mirrors the display's screen.
4. PWR|Video|Audio — The power/video/audio connector provides a
connection to a 12 / 24 V dc power supply, an analog video input via BNC
connector, and analog audio output via RCA connectors.
Note:
• Axiom® 2 Pro displays are supplied with a Power/video/audio cable
that has a straight connector. A right angled connector cable is also
available (part number: A80745 ).
• The original Axiom® Power/Video/NMEA 0183 cables cannot be used
with Axiom® 2 Pro displays.
5. RV/RVM Transducer — Used to connect RealVision™ Max 3D or
RealVision™ 3D transducers. Also allows connection of DownVision™,
Cables and connections — General information
SideVision™ or CPT-S CHIRP conical beam transducers, via an adapter
cable.
6. 1kW Transducer — Enables the connection of CHIRP / Traditional (up
to 1kW) transducers.
7. NMEA 2000 — Enables connection to a SeaTalkng ® or NMEA 2000
network, using the supplied SeaTalkng ® to DeviceNet adaptor cable, or a
suitable DeviceNet cable.
8. Network — The 2 x network connectors enable connection of RayNet
devices.
9. Ground — The optional grounding point should only be used when the
display experiences touchscreen interference from nearby equipment.
The grounding point should be connected to the same RF ground point
as the interfering equipment, or the vessel's negative battery terminal.
9.3 Connections overview — S variant displays
The following connections are available on Axiom® 2 Pro S variant displays:
1. GPS Antenna — Enables connection of an optional external passive
GNSS (GPS) antenna (e.g.: GA200, part number A80589).
2. Accessory — Enables connection of an external card reader, such as the
RCR-SD/USB (part number A80440).
3. HDMI Out — Enables connection of an external HDMI monitor or HDTV,
using the Micro HDMI (Type D) to HDMI cable (part number A80723). The
external monitor mirrors the display's screen.
53