Table of Contents
Advertisement
81170_2.BOOK Page 5 Thursday, July 19, 2001 2:36 PM
Chapter 2: Installation
2.3 Connections
NMEA Version
.
Figure 2-2: Pole Mounting Arrangement
Two versions of this unit are available; SeaTalk and NMEA.
The unit is normally connected to an NMEA system via a 33ft (10m)
cable terminated with a moulded 6-pin connector. Alternatively,
connection can be made to other types of NMEA connector. The
cable can be cut as necessary to the required length, or coiled and
stored out of the way.
If you have equipment with a dedicated GPS port that accepts this
connector, you should use it. If it is not possible to use this connector,
remove the 6-pin connector and re-connect the cable using a
2-5
D4726-1
Hide quick links:
Advertisement
Table of Contents
