Repairs; Returning Devices To Samson - Samson 2404-2 Mounting And Operating Instructions

12 Repairs

If the regulator does not function properly
according to how it was originally sized or
does not function at all, it is defective and
must be repaired or exchanged.
NOTICE NOTICE
! !
Risk of regulator damage due to incorrect
service or repair work.
Î Do not perform any repair work on your
own.
Î Contact SAMSON's After-sales Service
for service and repair work.
EB 2540 EN
12.1 Returning devices to
SAMSON
Defective devices can be returned to
SAMSON for repair.
Proceed as follows to return devices:
1. Put the regulator out of operation (see
the 'Decommissioning' section).
2. Decontaminate the valve. Remove any
residual process medium.
3. Fill in the Declaration on Contamination.
The declaration form can be download-
ed from our website at
u www.samsongroup.com > SERVICE &
SUPPORT > After-sales Service.
4. Continue as described on our website at
u www.samsongroup.com >
SERVICE & SUPPORT > After Sales
Service > Returning goods.
Note
Further information on returned devices and
how they are handled can be found at
u www.samsongroup.com > SERVICE &
SUPPORT > After-sales Service.
Repairs
12-1