Table of Contents
Advertisement
Removal Procedure
Septum
Gas-liquid separator
Suction pipe
40
Procedure
13. Remove acoustic cotton
Split the acoustic cotton lock,and take out 3 pcs slowly.
NOTE: Do not damage the pipe.
Acoustic cotton 1
Acoustic cotton 2
Acoustic cotton 3
14. Remove 4-way valve assy
4-way valve assy
Unsolder the spot weld of 4-way valve assy,
compressor and condenser, and then remove
the 4-way valve assy .
Discharge the refrigerant completely before
unsoldering,when unsoldering, wrap the gas
valve with awet cloth completely to avoid
damage to thevalve caused by high
temperature.
When unsoldering the spot weld, wrap the
4-way valve with wet cloth completely to avoid
damaging the valve due to high temperature.
15. Gas liquid separator and diaphragm
Open the suction of spot welding, remove the suction
pipe. Use screwdriver unscrewed the fixed screw of gas-
liquid separator, the upward gas-liquid separator, gas-
liquid separator is desirable. Use a screw knife clapboard
and chassis have fixed screw drive, partition is desirable.
Note
Warning
Advertisement
Table of Contents
