Placing/Removing a Printable Disc
•
Before Placing a Printable Disc
•
Placing a Printable Disc
•
Removing a Printable Disc
Before Placing a Printable Disc
A printable disc differs from regular disc (BD/DVD/CD, etc.) in that its label surface has been specially
processed or printing by an inkjet printer.
The following items are needed to print onto the printable disc.
•
• Multi-purpose tray (supplied with the printer)
The multi-purpose tray is stored in the multi-purpose tray storage compartment of the paper output
tray.
Detaching Multi-purpose Tray
• 4.72 in. (12 cm) printable disc
•
Obtain a printable disc with a label surface compatible with inkjet printing.
Placing a Printable Disc
To print onto a printable disc, place it on the supplied multi-purpose tray, and then insert it into the printer.
This procedure also applies to printing from a computer.
Important
•
• Do not mount the multi-purpose tray until the message prompting you to load the printable disc
appears. Doing so can damage the printer.
Note
•
• If test printing is executed onto test printing paper, depending on the paper type, the printer may not
be able to read its size correctly, preventing the border areas from being printed. Test printing paper
should be used for purposes of checking the envisioned layout.
79