Table of Contents
Advertisement
Custom Settings dialog box
When you click Custom Settings, the Custom Settings dialog box is displayed.
If necessary, switch between various modes of printer operation.
Detects compatible media in the multi-purpose tray
Detects whether compatible media is loaded on the multi-purpose tray during printing using the
multi-purpose tray, and displays a message if compatible media is not loaded.
Uncheck this check box to print without detecting whether compatible media is loaded.
Important
• If you leave this check box unchecked, the printer may print to the multi-purpose tray even
if compatible media is not loaded on the multi-purpose tray. Therefore, you should check this
check box under normal circumstances.
• If you load compatible media that has already been printed onto the multi-purpose tray, the
printer may detect that no compatible media is loaded on the multi-purpose tray. In this case,
uncheck this check box.
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation.
To rotate the print data 90 degrees to the left during printing, check this check box.
Important
• Do not change this setting while the print job is displayed in the print wait list. Otherwise,
characters may be omitted or the layout may become corrupt.
Note
• If Envelope Com 10, Envelope DL, Yougata 4 4.13"x9.25", or Yougata 6 3.86"x7.48" is
selected for Page Size on the Page Setup tab, the printer rotates the paper 90 degrees to the
left to print, regardless of the Rotate 90 degrees left when orientation is [Landscape] setting.
Do not detect mismatched paper settings when printing from a computer
When you print documents from your computer, the paper settings in the printer driver and the paper
information registered on the printer do not match, this setting disables the message display and
allows you to continue printing.
To enable detection of paper setting mismatches, uncheck this check box.
Align heads manually
Usually, the Print Head Alignment function in the Maintenance tab is set to automatic head
alignment, but you can change it to manual head alignment.
If the printing results of automatic Print Head Alignment are not satisfactory, perform
alignment.
Check this check box to change to manual head alignment.
Ink Drying Wait Time
You can set the length of the printer rest time until printing of the next page begins. Moving the slider
to the right increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page dries,
increase the ink drying wait time.
299
manual head
Advertisement
Table of Contents
