Ink Does Not Come Out/Blurry Or Fuzzy/Inaccurate Or Bleeding Colors/Streaks - Canon Pixma TS8700 Series Online Manual

Ink Does Not Come Out/Blurry or Fuzzy/Inaccurate or Bleeding
Colors/Streaks
Ink Does Not Come Out
Note
• • If printouts are blank, black does not print, is faint, or has a blue or red tint, refer to this web page.
Check paper and print quality settings.
Check 1
Resolving Print Quality Problems
Check status of ink tanks. Replace ink tank if ink has run out.
Check 2
Checking Ink Status on the Touch Screen
Replacing Ink Tanks
Are the orange tape and plastic wrap still on the ink tank?
Check 3
Make sure all the protective plastic wrap is peeled off to expose the Y-vent area, as shown below (A).
If the orange tape remains on the ink tank (B), peel it off.
Blurry or Fuzzy Inaccurate or Bleeding
Colors
485
Streaks