Table of Contents
Advertisement
7.
7. Follow on-screen instructions to load copy source BD/DVD/CD on platen and select OK.
The print setting confirmation screen is displayed.
Important
• Be sure to load the copy source BD/DVD/CD with its label side down on the center of the platen. If
•
you load it near the edge of the platen, part of the image may be cut off.
8.
8. After checking message, tap Black or Color.
9.
9. Open operation panel until horizontal.
10. Follow on-screen instructions to
10.
Note
•
• You can see the procedure to set the printable disc by selecting How to set.
11. Select OK.
11.
The printer starts copying.
Note
•
• After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has
dried.
•
• If printing is misaligned, adjust the printing position using Adjust disc print area in Print settings
under Printer settings.
set printable
disc.
358
Advertisement
Table of Contents
