Table of Contents
Advertisement
Radiometer Transcutaneous pO2/pCO2 Monitor
Step 4: Enter a device name, device-id and channel labels
Step 5: Configure the alarm channels
Step 6: Configure each numeric channels
186
(10 Minutes)
All the TCM3 parameter labels need to be entered with the handheld keypad. The
following parameter abbreviations are recommended as labels for these, but the
customer can decide on his/her own abbreviations.
The TCM3 Analog Interface provides the following 2 numerics:
Numerics
Partial Oxygen Pressure
Partial CO
Pressure
2
1. Label restricted to 5 characters.
(10 Minutes)
The configurations for the alarm channel are provided below:
Input Voltage Range
Active
(30 Minutes)
The configurations for each numeric channel are provided in the following table.
Name
0...1 V
Highlablists
Label
!TCPO
2
1
!CPCO
2
Free Analog Device Information
Advertisement
Table of Contents
