Philips VueLink M1032A Service Booklet page 171

Step 4: Enter a device name, device-id and channel labels
Step 5: Configure each wave and numeric channels2
Free Analog Device Information
(10 Minutes)
Only the AWP and the MIVOL labels are offered in the configuration window of
the Ventilator Free Analog Driver. All the other ELSA/EAS parameter labels need
to be entered with the handheld keypad. The following parameter abbreviations are
recommended as labels for these, but the customer can decide on his/her own
abbreviations.
The ELSA/EAS Analog Interface provides the following waves and numerics (two
of the waveforms were selected when the free analog cable was prepared in Step 3):
Name
Waves
1
CO Concentration
2
Airway Pressure
Expiration Flow
Inspiration Flow
Anesthetic Agent
Numerics
O Concentration
2
Exp. Minute Volume
Total Fresh Gas Flow
1. Optional for ELSA.
Alarms
No alarms are activated for the ELSA/EAS Free Analog Device Driver.
(30 Minutes)
Engström ELSA/EAS Anesthesia System
Label
!CO2CC
AWP
!EXPFL
!INSFL
!AGT 2
!O2CC
!MIVOL
!FRESH
171