Table of Contents
Advertisement
Step 1: Ensure that all the necessary hardware is available
Note
Free Analog Device Information
(10 Minutes)
You will need:-
•
An M1032A #A01 VueLink Module
•
4m Free Analog (open end) cable M1032A #K6A or M1182A #K6A
or
2m Free Analog cable M1032A #K60 or M1182A #K60.
•
A connector to fit the TCM3 Analog Interface connector:
Connector D-sub 15 pole, female.
Standard hood with M3 securing screws.
This connector is provided locally by the hospital or by the manufacturer; it will not
be set up at SMO/SLI. (The connector provided with the free analog cable cannot
be used).
Radiometer Transcutaneous pO2/pCO2 Monitor
183
Advertisement
Table of Contents
