Table of Contents
Advertisement
3. ACCESSORIES TO BE ORDERED SEPARATELY
3.1) DBG-F2 device
web and track fittings, complete with the following terminations:
TDB 1:
–
for switch blades and compound frogs.
TDB 3:
–
for repairing (adjusting) existing holes on rails for subsequent ap-
plication of electrical connections and for additional special applications.
TDB 6:
–
standard termination for rails and stock rails.
(*)
already supplied with LD-16B-RP LD-16B-RPA LD-16B-RPE LD-16B-RPT drill type.
TDB 7
3.3) VAL P24 plastic carrying case
VAL P24-CS wheeled plastic carrying case
3.3.1) VAL LD-L metal case
tool case.
9
(*) with moving arm for clamping the drill to the rail
3.1.1) DBG-LF2 device
with moving arm complete with
for clamping the drill to girder rails and for additional
special applications.
3.2) DBSN device
For clamping the drill to flange rails, for use in conjunc-
tion with the MPAF templates.
Using this device the rail drill can remain clamped
in the drilling position even when trains pass over it.
for storing the drill complete with the DBG-F2 and drilling accessoires.
for storing the drill complete with the DBG-LF2 device, DBSN device and VAL MPA
VAL P24-CS
TDB 7
termination
: VAL P24 with folding handle and wheels.
TDB 6
TDB 3
TDB 1
VAL LD-L
Advertisement
Table of Contents
