JANE Be Cool quick fold Manual page 9

EN
¡IMPORTANT! Keep these instructions for
future reference
• WARNING! Never leave your child unattended.
• WARNING! Ensure that all the locking devices are
enganged before use.
• WARNING! To avoid injury ensure that your child
is kept away when unfolding and folding this
product.
• WARNING! Do not let your child play with this
product.
• WARNING! Use a harness as soon as your child
can sit unaided.
• WARNING! Always use the restraint system.
• WARNING! This product is not suitable for running
or skating.
• Suitable for children under 6 months old only
with accessories approved by BE COOL.
• This pushchair may only be used by one child at
the same time.
• The maximum load carried in the basket must
never exceed the limit indicated on the basket (4
kg).
• Take care when going down escalators as the rear
safety catch may come undone.
16
• The parking device shall be engaged when
placing and removing the children.
• Any load attached to the handle and/or on the
back of the backrest and/or on the sides of the
vehicle will affect the stability of the vehicle.
• Only replacement parts supplied or recommen-
ded by BE COOL shall be used.
• WARNING: Move the position of the harness
according to the child's age and use the lowest,
tightest position for children under 6 months old.
• "This vehicle is intended for children from 0
months up to 22 kg or 4 yeard old (whichever
happens first). "
• WARNING: Never use the strap between the legs
without using the lap belt.
• WARNING! Any load attached to the handlebars
and/or to the rear of the seatback and/or to the
sides of the vehicle may affect the stability of the
vehicle.
• Only spare parts provided or recommended by be
cool should be used.
• COMPLIES WITH EUROPEAN SAFETY REGULA-
TIONS EN 1888-2:2018 +A1:2022
OPERATION INSTRUCTIONS
1_ OPEN THE STROLLER
1.1 Swipe(1) and then press folding button (2).
1.2 Then lift and pull the handle up (3), meanwhile open the
frame (4).
1.3 Open the canopy (5).
2_ FRONT WHEEL INSTALLATION
2.1 Front wheel installation: Insert the front wheel set into
the slot to complete the front wheel installation.
Front wheel disassembly: find the front wheel quick
release button, press or push the sharp object against
the quick release button, then the disassembly can be
completed.
2.2 Quick release button of front wheel as shown in the
figure.
3_ REAR WHEEL INSTALLATION
3.1 Insert the rear wheel directly into the slot to complete
the rear wheel installation.Disassembly of rear wheel:
Please pull the quick release button of rear wheel
upward before removing the rear wheel to complete
disassembly.
3.2 Quick release button of rear wheel as shown in the
figure.
4_ BUMPER INSTALLATION
4.1 Simply insert the front bumper into the designated
groove to complete the front bumper installation.
Disassembly of the front bumper:
Press the quick release button on both sides of the front
bumper at the same time as shown in Figure, and then
pull out the front handrail upward to complete disassem-
bly.
4.2 The front bumper quick release button is shown in Figure.
5_ FOOTREST ADJUSTMENT
5.1 Press and hold the footrest adjustment button on the left
and right sides to adjust the pedal up and down.
5.2 The pedal adjustment button as shown in the figure.
6_ BACK ADJUSTMENT
6.1 When the back is lying flat, find the backrest adjusting
buckle at the back of the backrest.
6.2 As shown in the figure, the backrest Angle adjustment
buckle clip.
Hold the backrest adjusting buckle clip with one hand, pull
the backrest adjusting ribbon up and down to adjust, then
the Angle of backrest can be raised or lowered.
6.3 Tighten the backrest adjustment clasp upward to adjust
the seat. Similarly, the reverse operation will return to the
flat state.
7_ BOUCLE
7.1_ Insert the buckle (1) and (2) in the upper part of the central
buckle and the straps remain attached.
Open: press the central button (3) of the safety buckle to
release the straps
7.2_ Safety Strap Adjustment: Hold one end of the safety strap
and slide the buckle up and down to adjust the length of
the strap.
EN
17