Advertisement
Installation
impractical, theunitmaybeconnected t othepower supply viaa threewirecon-
nection.
1. Disconnect electrical power at breaker b ox.
2. Remove theterminal b lockcovertoexpose theterminal b lock.
Figure 16: Terminal Block
3.
Remove top nut, star washer, and round washer from each post.
Note:
DO NOT remove last round washer, last nut or internal wiring leads.
4.
Attach white wire, round washer, star washer and nut IN THIS ORDER on top
of ground strap on center post.
5.
Attach red wire, round washer, star washer and nut IN THIS ORDER to left
post.
6.
Attach blackwire, round washer, star washer and nut tN THIS ORDER to right
post.
s/
black
ground strap
white
red
Figure
17: Three
Wire
Connection
English 15
Advertisement
