Advertisement
Installation
Note:
Theslide-in range canalsoreplace a freestanding range. I nthis
case, v erifythattheopening isat least30inches.
Figure 6: Cutout Requirements - Replacing a Free-Standing Model
1
30in (76.2 cm )
0
min. centered
4in (10.2 cm
30in (76.2 cm) rain.
min
> |1
_c::::3_ _ ,
.<
J
no clearance
required
(12 mm clearance
from
range
sidewalt
to cabinet
required
in Canada.)
0
4in (10.2 cm)
min
4
Figure 7: Cabinet Preparation
Required Clearance I
_hL
ARNING:
To eliminate the risk of burns or fire by reaching over heated surface
units, cabinet storage space located above the surface units should
be avoided. If cabinet storage is to be provided, the risk can be
reduced by installing a hood that projects horizontally a minimum of 5
inches beyond the bottom of the cabinet.
1.In Canada, a clearance of 12 mm from range sidewall to cabinet is required.
1. Instructions were determined using standard American
cabinets. Standard base cabinets mea-
sure 36" high x 24" deep. Cabinets over the cooking surface and cabinets adjacent to those over
the cooking surface measure 13 inches deep from backwall. If nonstandard
cabinets are used,
care should be taken to alter dimensions
accordingly.
English 9
Advertisement
