Advertisement
Installation Procedure
Installation
Apply Foam Tape
Install Backwall Trim
Apply foam tape to underside of cooktop trim in one continuous piece.
Note:
This step is only required if the countertop does not connect behind
the range (i.e.; when replacing a free-standing
range). See "Cabinet
Requirements" on page 8 for more information
Install 2 screws through holes in trim and in range backwall. See Figure 9: Back-
wall Trim Strip and Figure 10: Install Backwall Trim Strip
Backwall
Trim Strip
Figure 9: Backwall Trim Strip
Connect Electric
Back of Range
Figure 10: Install Backwall Trim Strip
There are two possible electrical connections:
1.
Four wire range cord
English 11
Advertisement
